BendixKing AV8OR - Manual (Page 337)

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008 Appendix
Rev 5 Mar 2012
Page 4-7
© Honeywell International Inc. Do not copy without express permission of Honeywell
2.
With your Radio ID number ready, call XM’s Listener Care at
800-985-9200 to subscribe to the XM WX and/or XM Radio
services. For prompt service, be sure to also have your data
package choice and payment option ready when you call.
3.
After you have subscribed to the XM WX and/or XM Radio
services, tap on the
Activation Mode soft key.
4. It may take up to an hour to begin receiving XM data. Make sure
that the GPS is in an area where good satellite reception is
available. Make sure the AV8OR unit is fully charged or is
operating off of AC/DC power instead of the internal battery so
enough power is available to finish the activation sequence.
5.
Once XM data is received, the Service Level field will show. This
indicates that the XM receiver has been activated and XM
services are available for use. Tap the
Normal Mode soft key to
exit the Activation Mode.
To return to the XM Radio page, tap on the
OK soft key.
XM Radio Tuning
The main XM Radio page shows a scrollable list of the XM radio
channels that are available and soft keys on the bottom of the page.
NOTE:
Due to limitations with the WxWorx XM receiver, only the
first eight characters of the Artist and Song Title are
available to be displayed. Therefore, you may find that some
artists and song titles are truncated in the display at the top
of the XM Radio page.
To select a channel, use the scroll bar on the right to scroll to the
channel you want to listen to and tap on the channel to highlight it.
Tap on the
Select Channel soft key to select it.
To select a category, tap on the soft key on the upper right side
of the screen to show the XM Categories page as shown below.