Enabling safety mode, Pausing the active route, Deleting the next via point from the route – BendixKing AV8OR User Manual
Page 272: Enabling safety mode -60, Pausing the active route -60, Deleting the next via point from the route -60
Honeywell Bendix/King AV8OR Handheld User’s Guide
Automotive Mode Operation
D200803000008
Page 3-60
Rev 5 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
•
Tap
•
to run the simulation at normal speed and with voice
guidance instructions announced. This option is for
demonstration purposes, or for checking difficult parts of the
route in advance.
3.
The simulation can be aborted any time by tapping
.
Enabling Safety Mode
This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to
keep your attention on the road. While driving, you will not be able to
set a new destination or to change settings. The only screen control
that remains enabled is the gesture that puts you back on the Map
screen.
The procedure is explained starting from the Map screen.
Tap the following soft Keys:
,
,
,
.
Pausing the Active Route
You do not need to pause the active route: when you start driving
again,
GoDrive
restarts the voice instructions from your position.
Deleting the Next Via Point from the Route
The easiest way to delete the upcoming route point (the next via
point) in both Simple mode and Advanced mode is to open the
Route Information screen by tapping the Turn Preview field (
)
on the Map screen, and then tapping
In Advanced mode, you have another option. Tap the following soft