Wxworx xm weather receiver bluetooth setup, Wxworx xm weather receiver bluetooth setup -12, Figure 6-6: wxworx bluetooth receiver setup – BendixKing AV8OR User Manual
Page 360
Honeywell Bendix/King AV8OR Handheld User’s Guide
Appendix D200803000008
Page 6-12
Rev 5 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
WxWorx XM Weather Receiver Bluetooth Setup
To configure the AV8OR to receive weather data from the Bluetooth
version of the WxWorx XM Weather Receiver, perform the following
steps:
Setup the WxWorx receiver in the
Device and Port Setup
page as
follows:
1.
On the Main Menu page, tap the
soft key to start the
Aviation mode navigation program.
2.
From the Map page, tap on the
MAIN MENU
soft key to go to
the Aviation Main Menu.
3.
Tap the
soft key to open the System Setup Menu.
4.
Highlight the
Device Setup
option and tap the
SELECT
soft key
to show the
Device and Port Setup
page.
5.
Set the Weather
Port
to
BlueTooth.
6.
Set the Weather
Type
to “
WxWorx
”. When finished the Device
and Port Setup page should look like in Figure 6-6.
Figure 6-6: WxWorx Bluetooth Receiver Setup
Establish a paired connection between the WxWorx XM receiver and
the AV8OR.as follows: