Navigation settings, Navigation settings -113 – BendixKing AV8OR User Manual

Page 325

Advertising
background image

Honeywell Bendix/King AV8OR Handheld User’s Guide

D200803000008

Automotive Mode Operation

Rev 5 Mar 2012

Page 3-113

©

Honeywell International Inc. Do not copy without express permission of Honeywell

Soft Key

Description

Set Time Zone

Set time zone manually if you do not want to
synchronize the time zone automatically.
This allows you to use Auto Time Correction
and apply a time zone offset to obtain the
desired time.

Compare GPS and
device times

The current time of the GPS receiver and the
device clock are displayed. Please note that
the GPS clock is only available with GPS
reception. This allows you to check whether
any correction is needed.

Navigation Settings

You can control how

GoDrive

behaves during navigation. Tap the

following soft Keys:

,

,

.

Soft Key

Description

Keep Position on
Road

This feature allows car drivers to always
correct GPS position errors by matching the
vehicle position to the road network. For
pedestrian navigation, this feature is
automatically disabled to let the software
show your exact position. By turning off this
feature you also turn off the GPS position
error filtering. The position shown on the
map will be subject to all position errors and
position fluctuations.

Off-route
Recalculation

This switch tells

GoDrive

whether to

automatically recalculate the route when you
deviate from it. If this feature is turned off,
you need to initiate route recalculation
manually otherwise navigation will be
stopped until you return to the originally
recommended route. Setting another point
than the current GPS position as the start
point of the active route will automatically
disable this feature.

Advertising