Selecting the cursor as the destination, Entering an address or part of an address, Selecting the cursor as the destination -39 – BendixKing AV8OR User Manual
Page 251: Entering an address or part of an address -39
Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008
Automotive Mode Operation
Rev 5 Mar 2012
Page 3-39
©
Honeywell International Inc. Do not copy without express permission of Honeywell
.
SELECTING THE CURSOR AS THE DESTINATION
1. Locate your destination on the map: move and scale the map as
needed.
2. Tap the location that you want to select as your destination. The
Cursor (
) appears.
3. Tap
to open the Cursor menu.
4. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
Tip!
If you know that you will use a destination later, when the Cursor
menu appears, save it as a POI, or put it on the list of your
Favorites first. The Cursor menu returns automatically with the
same point. Now you can use it as a route point.
ENTERING AN ADDRESS OR PART OF AN ADDRESS
If you know at least a part of the address, it is the quickest way to
select the destination of the route.
•
Using the same screen, you can find an address by entering:
•
The exact address, including house number
•
The center of a settlement
•
An intersection
•
The midpoint of a street
•
Any of the above, starting the search with the postal code.