BendixKing AV8OR - Manual (Page 88)

Honeywell Bendix/King AV8OR Handheld User’s Guide
VFR Moving Map Function D200803000008
Page 2-48 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Tap the MORE INFO soft key to see additional information about the
location. If additional pages are available, the NEXT INFO soft key
shows. When finished browsing the additional data, tap the CLEAR
soft key to return to the WayPoint Entry Screen.
Tap the OBS soft key to start an OBS course and show the
magnetic heading from your present position to the WPT
.
Tap the DIRECT TO soft key to accept the entered location. The
system sets a new course from the aircraft’s present position directly
to the entered WPT’s position and shows the new Direct-To course
on the Map.
Re-center aircraft when Direct-To is already enabled
When flying on a course using the Direct-To function, if the aircraft
gets away from the course line on the map, the pilot can easily
create a new course line to the destination from the aircraft’s present
position by using the steps that follow:
Tap the soft key from the Map page to display the virtual
keyboard. The active Direct-To destination will already be filled in on
the keyboard.
Figure 2-56: Re-center aircraft – Step 1
Tap the Enter soft key to use the entered WPT and re-center the
course line from the aircraft’s present position to the destination.