BendixKing AV8OR - Manual (Page 58)

Honeywell Bendix/King AV8OR Handheld User’s Guide
VFR Moving Map Function D200803000008
Page 2-18 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
For configuration of the Auto-Hide Soft keys, please refer to
the General System Setup section on page 2-146 in the System
Setup section.
The labels are redisplayed when the user touches the screen. This
feature maximizes the visible area for mapping. This feature can be
disabled by setting the Auto-Hide Keys on the Map Mode Page to
OFF in the General System Setup page (Refer to the
General
System Setup section on page 2-146).
DATA FIELDS
Up to four data windows can show at a time on the left side of the
map page. Up to 9 data windows can be configured for display. The
five data windows that do not show on the page are displayed by
dragging the data windows up or down to show the data fields that
are off screen.
Data fields are selected in the System Setup Menu, Refer to
the
Data Field Setup section on page 2-156.
The Data Fields that follow can be selected for display on the map
page.
Altitude Data Field
The Altitude data field displays the highest priority
enabled GPS altitude source.
Bearing Data Field
The Bearing data field displays the bearing of the
current destination WPT for the aircraft position in degrees relative to
magnetic north.
Course Deviation Indicator (CDI) Data Field
The Course Deviation Indicator data field displays the
perpendicular distance from the aircraft position to the desired track.
The triangle in the center displays whether the aircraft is going TO or
FROM the destination WPT. If the triangle points upwards, the
aircraft is going
TO the destination. If the triangle points downwards,
the aircraft is going FROM the destination.
The table below displays the full scale limits for the CDI.