BendixKing SG 465 System EFS 50 - Manual (Page 102)

EADI Displays
4.2.8 Issued 4/95 SW 06/07/08/11
GLIDESLOPE/VERTICAL
NAVIGATION
When the selected primary NAV
sensor is ILS, MLS or LNAV with
VNAV selected, a stationary
white vertical deviation scale will
appear on the right or left side of
the EADI display as configured at
the time of installation and certifi-
cation. This scale provides a ref-
erence for the vertical deviation
pointer. The deviation pointer
moves in relation to the scale to
indicate glide path center with
respect to aircraft position.
When the on-side sensor is
selected for display, the deviation
pointer is green in color. When
the off-side sensor is selected for
display, the deviation pointer
changes to yellow alerting the
pilot that he has selected his off-
side nav sensor.
If the selected sensor is ILS or
MLS, a “GS” (or “GP” for MLS
with SW 08) will be displayed in
the pointer. “VN” will be annunci-
ated if the selected sensor is an
LNAV with VNAV selected.
Additional configuration options
selectable at the time of certifica-
tion:
❏ Declutter GS on Back Course,
allows the vertical deviation scale
to be in view at all times or only
when the selected course is with-
in 105degrees of the aircraft
heading.
❏ Vertical Scale Side, allows the
vertical deviation scale to be dis-
played on either the right or left
side of the EADI and EHSI dis-
play.
❏ Vertical pointer annunciation
for MLS can be “GS” or “GP” with
software 08.
Vertical Pointer Type selected at
the time of certification.
MARKER BEACON
ANNUNCIATION
In the lower left corner, marker
beacon information is displayed
inside a hexagon shaped box.
The outer marker, “OM” is dis-
played in cyan. The middle mark-
er, “MM” is displayed in orange.
The inner marker, “IM” is dis-
played in white. All three mark-
ers may be displayed simultane-
ously. Flashing of the marker
display is also possible providing
the marker receiver flashes its
output.
FAST/SLOW
An optional display item,
selectable at the time of installa-
tion and certification. If config-
ured, will be displayed on the
opposite side of the EADI from
the Glideslope scale. The scale
consists of two vertical white
unfilled diamonds and one white
unfilled circle.
When Fast/Slow is configured,
the scale and pointer will be dis-
G
S