Ref map format – BendixKing SG 465 System EFS 50 User Manual

Page 44

Advertising
background image

EHSI Operation

2.1.9

Issued 4/95

SW 06/07/08/11

Note: Time-to-station is replaced

with Time-to-waypoint when the
selected primary nav is an LNAV
providing this information.

REF MAP FORMAT

When the selected EFS 50 dis-
play is LNAV MAP, the TST/REF
button allows selection of the
desired NAV MAP format. To
determine the present MAP for-
mat momentarily press the
TST/REF button. The momen-
tary button press will activate the
present MAP format annuncia-
tion. If the displayed format is
desired, no additional action is
required; the format message will
be removed within 5 seconds. If
a different format is desired,

sequence through the list by
momentarily pressing the
TST/REF button until the desired
format is displayed. Approxi-
mately 5 seconds after the last
button press, the map format
annunciation will be removed.

With software 06 and 07, the
NAV map format will remain as
previously selected until changed
using the TST/REF button, how-
ever beginning with 08 software
the NAV map format is re-set to
FPL ID each time a MAP display
is activated.

The following is an all-inclusive
list, in order, of the possible NAV
MAP formats:

Note: Depending upon the Flight Management System installed,

the above format options may not be fully supported. Systems
such as the BENDIX/KING KNS 660 and KLN 88, that support the
GAMA 429 LNAV data bus will provide the above format options.

FPL ID

AIRPORT

NAVAIDS

TEST

REF

(FLIGHT PLAN WITH
FULL ICAO IDENTIFIERS)

(TO WAYPOINT AND NEAREST
AIRPORTS WITH ICAO IDENTIFIERS)

(TO WAYPOINT AND NEAREST NAVAIDS
WITH ICAO IDENTIFIERS)

Advertising