BendixKing SG 465 System EFS 50 - Manual (Page 135)

MFD Displays
4.4.12 Issued 4/95 SW 06/07/08/11
oritized discrete lines for emer-
gency page use. Using the PC,
the user can bind these active
low inputs to specific checklist
pages, which can be tailored to
the nature of the emergency dis-
crete. Any discretes which are
not bound using the PC will be
ignored by the CP 469A.
Whenever one of these inputs
goes low while checklist mode is
active, the checklist unit will auto-
matically display an emergency
summary page listing all currently
active emergencies, and the title
of the list that the emergency is
bound to. The user may select
the emergency of choice, and
press the ENTER button. Control
is then transferred directly to the
emergency list desired. As soon
as the user checks off all items
associated with a given active
emergency, the checklist unit will
again display the emergency
summary page, showing that
emergency
condition as
checked-off. This allows the user
to know when all the checklist
items associated with an emer-
gency have been checked off,
and allows an easy way to pro-
ceed to the next active emergen-
cy, if one exists.
If an emergency discrete activa-
tion is detected by the CP 469A
while the checklist mode is not
active, a yellow “C-L EMER”
message will be displayed on the
MFD. When the user presses
the CHK LIST button to activate
the checklist mode, the checklist
unit will display the emergency
summary page as described
above. This provides the
pilot/copilot with an easy means
to determine the source of the
emergency discrete (the name of
the checklist it is tied to will
appear on the emergency sum-
mary page) and to proceed to
check off the items associated
with that emergency. Once all
the items associated with a given
emergency are checked off, the
checklist unit will consider that
emergency ‘handled’, and will
remove the request for the “C-L
EMER” message. However, if a
given emergency discrete is re-
applied after all items associated
with that emergency have been
checked off, the checklist unit will
again notify the user that a given
emergency has re-occurred via
the emergency summary page.
The CRS/SEL button can be
pressed to display the emergen-
cy summary page any time the
checklist mode is active. A sec-
ond press of the CRS/SEL button
at this time, returns the previous-
ly displayed checklist page.
While the emergency summary
page is displayed, the 1-2 key
can be used to display a list of all
the emergencies that were
mapped to an emergency dis-
crete.
◗ CHECKLIST CONTROLS
Checklist: CHKLIST
Selecting the CHKLIST button
activates and deactivates the
checklist function and causes the
information to be displayed on
the MFD. The checklist will