CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch - Manual (Page 33)

EdgeAccess Ethernet Switch
Configurable parameters
• Change Port select a port to view or change the parameters.
• Priority priority of the port; the lowest number has the higher priority.
• Path Cost cost in time for the designated port.
3.2.2.4 Spanning Tree Reports
The Spanning Tree Report screen shows the Spanning Tree parameters for the bridge network.
Reference Figure 25 for details. The following selections are available:
Figure 25. Spanning Tree Report Screen
• Designated Root the Root bridge in the network Spanning Tree.
• Topology Change how many times the network topology changed.
• Root Cost the cost of the path to the root from the bridge. When the bridge is the root, this
parameter has a value of zero.
• Root Port the Root port on the Root bridge.
• Max Age (in sec) the timeout value for information transmitted by the root. If the root goes off-
line, the bridge needs to timeout the stored configuration information and start again. This
parameter is used if the bridge becomes the root of the Spanning Tree.
Model 9135G SNMP Managed Gigabit Ethernet Switch 3-17