CANOGA PERKINS 9135G SNMP Managed Gigabit Ethernet Switch - Manual (Page 40)

EdgeAccess Ethernet Switch
3.2.6 Restore Defaults
Select 6 on the Main Menu to restore all configurable settings to factory defaults except for:
• IP Address (Network)
• Gateway Address
• Subnet Mask
• SLIP Address
3.2.7 Restart Unit
Select 7 on the Main Menu to restart the unit. See Figure 33. If you download firmware, you must
restart the unit to run the new revision.
Note: When you select Restart Unit, Data Exchange will be temporarily interrupted on all ports.
Model 9135G SNMP Managed Gigabit Ethernet Switch 3-24