Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 13)

13
Area
Enter the radius of the arc.
Completes radius and returns to the dialog "Measure
Point".
F1 F1 F1 F1 F1
CONT
Configuration Call the configuration in the first application dialog.
AREA\ Measure Point
MC
AREA\ Configuration
Two Faces : NO
MC
SHIFT
F2 F2 F2 F2 F2
CONF
Two Faces Single or two face measurement.
Code = 36 Entry of identifying code (for instance: 36) for
recording the area results in a GSI code block.
Log File Creation of a logfile.
Log Flname User definable name for the logfile.
Meas. Job Selection of the job for recording measurements.
Data Job Selection of the job containing the fix point
coordinates.