Basic procedure – Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) User Manual
Page 57
Advertising
57
Auto
Record
Basic procedure
Before starting Auto Record:
The station must be set up and oriented.
You set the time between measurements
You set the distance between measurements
You define “how close” for “how long” the prism is stable to trigger a
measurement record
Time Mode
Distance Mode
Stop & Go Mode
You can select the recording mode in the configuration (see
chapter
"Configuration").
10m
10m
10m
10 sec.
10 sec.
10 sec.
etc...
etc...
Stationary within 5 cm for 2 seconds
Advertising