Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 62)

62 Enter the distance tolerance (Dist. Tol): if the distance difference
between measured and previous points exceeds the tolerance, the
measured point will be rejected.
To start the face scanning and display information on the scanning
process.
SCAN\ Scanning In progress
#Pt. Done : 5
#Pt. Left : 15
#Pt.Rejctd : -23.2060 m
% of Work :
Time Left : 00:00:23
Point Id : 105
STOP PAUSE
MC
To interrupt the scanning process
Following dialog is displayed at the end of the scanning process.
SCAN\ Face Scanning
Scan completed!
#Pt. Done : 20
#Pt.Rejctd : 0
Time need : 01:00:23
MC
To quit the program.
F1 F1 F1 F1 F1
SCAN
End of Scan
SHIFT
F6 F6 F6 F6 F6
QUIT