Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 25)

25
Sets of
angles
Configuration Call the configuration in the first application dialog.
SETS\ SETS MENU
MC
SETS\ Configuration
MeasMethod : >>
MC
SHIFT
F2 F2 F2 F2 F2
CONF
MeasMethod:
=>< Measure Face I, then measure Face II in the
inverse sequence of Point Ids.
=>> Measure Face I, then measure Face II in the
same sequence of Point Ids.
=
◊
Measure Face I followed immediately by Face II.
User Disp. Use the display mask defined by the user.
Hz Tol. Entry of the tolerance for Hz-directions.
VAngle Tol. Entry of the tolerance for vertical directions.
Dist. Tol. Entry of the tolerance for distances.
Log File Creation of a logfile.
Log Flname User definable name for the logfile.
Meas. Job Selection of the job for recording measurements.
Data Job Selection of the job containing the fix point
coordinates.