Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 35)

35
Traverse
Configuration
Trav\ Traverse Menu
MC
PROG
F2 F2 F2 F2 F2
CONF
Two Faces Single or two faces measurement.
Mult.Meas Multiple measurement to a single target point.
Code = 38 Entry of identifiying code (for instance: 38) for
recording the Traverse results in a GSI code
block.
Log File Creation of a logfile.
Log Flname User definable name of the logfile.
Meas. Job Selection of the job for recording measurements.
Data Job Selection of the job containing the fix point
coordinates.
Trav\ Configuration
Two Faces : NO
Mult.Meas : NO
Code : 38
Log File : OFF
Log FlName : TRAVERSE.LOG
Meas Job : FILE01.GSI
CONT DEFLT INFO
MC
Call the configuration in the first application dialog.