Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 55)

55
COGO
Configuration Call the configuration in the first application dialog.
COGO\ COGO Menu
MC
COGO\ Configuration
Direc. Type : AZIMUTH
MC
To exit the configuration dialog.
SHIFT
F2 F2 F2 F2 F2
CONF
F1 F1 F1 F1 F1
CONT
Direc.Type Define the type of direction to be displayed
within COGO:
Choose between BEARING and AZIMUTH.
Offset = Yes To allow the entry of parallel offsets.
Meas job Selection of the job for recording
measurements.
Data job Selection of the job containing the fix point
coordinates.