Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 58)

58
MAIN MENU: PROGRAMS
MC
Start AutoRec from the program menu.
Enter Point Id of starting point and reflector height.
Aim at the reflector.
To start Auto Record: the instrument locks onto the prism and
starts the rapid tracking mode. It follows the prism as your move
about the survey site.
Measurement data are recorded automatically according to the
settings in Configuration.
You may input and record codes as necessary as you capture data.
To manually record measurement data at any time.
F4 F4 F4 F4 F4
START
F3 F3 F3 F3 F3
REC
PROG
AREC\ Auto Record
Point Id : 1
Point Code : -----
Refl.Ht. : 1.500 m
Hz : 289.3570 g
V : 64.5875 g
Horiz.Dist : 2.616 m
ALL DIST REC START
MC