Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 66)

66 Basic Procedure Start DTM Stakeout from the program menu.
Select the filename for the DTM. The file must be in the "\DTM"
directory on the PC Card.
If the file is a .DXF file, enter the DXF layer name for the DTM.
To continue to the Measure dialog.
DTM Stakeout will automatically check the validity of the file.
MAIN MENU: PROGRAMS
MC
DTMSO\ Select DTM File
Dir. : D:\DTM
DTM File : FILE01.DXF
DXF Layer : TRIANGLE
CONT DFLT INFO
MC
PROG
F1 F1 F1 F1 F1
CONT