Leica Geosystems TPS1100 Professional Series - Applikation - Feldhandbuch (Teil 2) - Manual (Page 65)

65
DTM
Stakeout
DTM Stakeout
This program compares a field measurement against a stored
Digital Terrain Model to calculate and display the Cut or Fill
between the existing ground and the DTM.
DTM Stakeout may be used for staking out where the DTM
represents the surface to be staked out. It may also be used for
quality control purposes where the DTM represents the final project
surface.
Before starting DTM Stakeout:
The station must be set up and oriented.
Introduction
Known:
DTM file
Unknown:
Cut of fill from any
measurement to the surface of
the DTM.
1
100pr81
,
,,
,,
,















N
E
H
Refl.Ht
∆
Htcut