STIEBEL ELTRON Accelera 300 - Manual (Page 27)

EN
GL
ISH
WWW.STIEBEL-ELTRON-USA.COM ACCELERA® 300 HEAT PUMP WATER HEATER | 27
INSTALLATION
SPECIFICATION
Model Heat pump water heater
Electrical details
Power connection, voltage / frequency L1,L2,G / 208-240 V / 60/50 Hz
Protection IP 24
Maximum power consumption (Tamb = 42 °C (108 °F),
Twater = 60 °C (140 °F), 240 V)
kW 2.2
Required circuit breaker size A 15A double pole breaker
Rated power consumption, heat pump A 2.5
Rated power consumption HP (in accordance with
DIN 8947, at 15 °C (59 °F) air temperature, 70% relative humidity
and 45 °C (113 °F)water temperature)
kW 0.5
Power consumption, booster heater kW 1.690
Heating output HP (at 15 °C (59 °F) air temperature, 70% relative
humidity, water heat-up from 15 °C (59 °F) to 60 °C (140 °F), in
accordance with EN 255 T3, 240 V / 60 Hz)
kW approx. 1.7
Coefficient of Performance (COP) (t) (at 15 °C (59 °F) air
temperature, 70% relative humidity, water heat-up from 15 °C (59
°F) to 60 °C (140 °F), in accordance with
EN 255 T3, 240 V / 60 Hz)
3.18
* Standard automotive R-12/R-134A manifold gauge set can be used to test and fill refrigerant.