360 Systems Instant Replay DR-552 User Manual
Page 14
Instant Replay Owner’s Manual
page 9
Preview
When P
REVIEW
is pressed in Stop mode the main audio outputs are muted, so Cuts played
subsequently can be auditioned from the headphone output only. Both the analog and digital
audio outputs are muted.
If P
REVIEW
is turned on during playback, the display changes from showing the current Cut
and playing time, to showing the ID Number, Name, Length and Hot-Key Assignment of the
playing Cut. The Cut will continue playing from both the main and headphone outputs. Other
Cuts can be selected using the Scroll Arrows, Find, or the Hot-Keys to view their
information.
In either case, pressing P
REVIEW
a second time exits this mode and restores normal operation,
including the Cut that was selected when Preview was pressed. If no Cut is playing, C
ANCEL
will also end Preview.
T
T
T
I
I
I
P
P
P
:
:
:
Using Preview to Find Unassigned Hot-Keys
P
REVIEW
is useful when assigning Hot-Keys to find an unassigned or unneeded key
without losing track of the Cut you are about to assign. Before pressing A
SSIGN
H
OT
-
K
EY
, press P
REVIEW
and then push H
OT
-K
EYS
until you find one that can be re-used or
that is unassigned. Press S
TOP
if a Cut is still playing, then press P
REVIEW
again. The
Cut to be assigned reappears. Use the normal Assign Hot-Key procedure to assign the
Cut to the Hot-Key you found.
Playlists
Playlists allow you to create and playback a sequence of Hot-Keys. You can set Playlists for
Follow-On as well as Manual-Step playback (see page 11). You can create one Playlist for
each Bank.
Loop
L
OOP
causes a Cut to repeat endlessly until either S
TOP
or L
OOP
is pressed. S
TOP
ends
playback immediately. Pressing L
OOP
exits from the Loop mode, and allows the current Cut
to continue playing to its end.
While a Cut is looping, another Cut can be selected for playback. A different Hot-Key can
also be played. The new Cut will immediately start from the beginning, and will also loop
until Loop
mode is exited.
Looping works in all modes. You can loop a single Cut, or an individual Cut in a Manual-
Step Playlist. Turning Loop on during playback of a Follow-On Playlist causes the entire list
to loop, not the individual Cuts.
Pause
P
AUSE
interrupts playback of a Cut. When pressed again, playback will resume.