360 Systems Instant Replay DR-552 - Manual (Page 40)

Instant Replay Owner’s Manual page 35
Backup begins and the display shows the current file number and the percent completion for
the current file:
FILE 1 OF 193
00% BACKED UP
Backup will proceed until all files are backed up, and the display will show the total number
of files.
If S TOP or C ANCEL is pressed during backup the display changes to:
QUIT BACKUP?
PRESS ENTER/CANCEL
Press C ANCEL or S TOP and the backup will continue. Press E NTER to stop backup. An ending
summary will be displayed.
Restore From Backup Procedure
The procedure for Restoring a Bank or Drive are the same. Instant Replay identifies the type of
backup automatically.
•
From the file transfer menu select RESTORE FROM BACKUP and press E NTER .
•
The display changes to:
ARE YOU SURE?
PRESS ENTER/CANCEL
•
Press E NTER to continue, or C ANCEL to exit this operation.
•
After pressing E NTER the menu button begins to flash and the display shows:
START RESTORE DEVICE
STOP/CANCEL TO QUIT
•
At this time start the DAT machine playing a backup tape through its AES/EBU digital
output, and press Enter. Alternately, press Cancel to exit from this operation .
When backup data is received from the DAT player, the display changes to show the current file
number and the percent completion for the current file:
FILE 1 OF 193
00% RESTORED
Restore will proceed until all files are restored; the display will show the number of files
successfully restored. Files received with DAT tape errors are skipped.
If the S TOP or C ANCEL buttons are pressed, the operation continues but the display shows:
QUIT RESTORE?
PRESS ENTER/CANCEL
If you press E NTER the restore discontinues and an ending summary is displayed.
If you press C ANCEL or S TOP at the prompt to quit, the display reverts to updating the file number
and percentage complete and the restore operation continues.
•
After the ending summary you are prompted to press E NTER . The machine resets
itself and restarts as it does when power is first applied.