360 Systems Instant Replay DR-552 - Manual (Page 3)

Instant Replay Owner’s Manual page i
SERIAL NUMBER:
FCC NOTICE
[Within USA Boundaries]
WARNING: This equipment has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is likely to cause
interference in which case the user will be required to correct the interference at
his own expense.
The user is cautioned that changes made to the equipment without the approval of
the manufacturer could void the user's authority to operate this equipment.
It is suggested that only shielded and grounded cables be used to ensure
compliance with FCC Rules.
NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
NOTICE
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS
Cet appareil numerique de la classe A respecte toutes les exigences du Reglement
sur le materiel brouilleur du Canada.
CAUTION!
INSTANT REPLAY CONTAINS A HARD DISK DRIVE. WHILE TODAY’S HARD DISKS ARE
VERY RELIABLE, THEY ARE VULNERABLE TO SHOCK. HANDLE WITH CARE. PLEASE
EXERCISE CARE NOT TO DROP OR BUMP INSTANT REPLAY – DAMAGE TO THE
INTERNAL HARD DISK MAY RESULT. BE SURE POWER IS OFF BEFORE MOVING THE
UNIT.
Printing history:
Software revision 1.0, April 1995
Software revision 1.1, August 1995
Software revision 1.3, November 1995
Software revision 1.3, March 1996
Software revision 1.3, July 1996
Software revision 1.3, January 1997
Software and Hardware revision 2.0 April 1998
Software 2.03 January 1999
Software 2.03 October 1999
Software 2.1 February 2000
Copyright 1995-2000 360 Systems
Printed in the United States of America
All rights reserved.