360 Systems Instant Replay DR-552 User Manual
Page 42
Instant Replay Owner’s Manual
page 37
•
Enter a Destination Receiver Name using the H
OT
-K
EYS
as Alphanumeric keys
The name specified as the destination machine may end with a single asterisk character (H
OT
-
K
EY
40) to indicate that all receivers partially matching the name should receive the transfer.
For example, EDITBAY* will transfer to Receivers named EDITBAY 1, EDITBAY 2,
EDITBAY 3, etc.
A single asterisk in the Destination Name will send to all Receivers regardless of their
Receiver Name.
To return to (NONE SPECIFIED) after using a specific name, simply edit the name and
delete all the characters using the B
ACKSPACE
key (H
OT
-K
EY
50), and press E
NTER
.
•
Press E
NTER
to confirm Destination Receiver name, or C
ANCEL
to restore the
previously entered name.
•
Press the S
CROLL
U
P
A
RROW
key to proceed. Depending on which type of destination
was most recently selected, the display shows:
DESTINATION LOCATION
DESTINATION LOCATION
MAIL BOX
OR
1.0001
(
SELECTED CUT)
•
Press the S
CROLL
U
P
A
RROW
key to proceed.
OR
•
Change the Destination Location by pressing E
NTER
, followed by a S
CROLL
A
RROW
key, to select between a specific location and MAIL BOX. The selection flashes until
you press E
NTER
again to confirm.
When a specific location is displayed, pressing E
NTER
allows selection of a different location.
Portions of the location field that are not applicable for a particular type of transfer are
displayed as X's:
1 . 0 0 0 1
(FOR TRANSFER OF A SINGLE CUT)
DRIVE DIRECTORY INDEX NUMBER
1 . 0 X X X
(FOR TRANSFER OF ALL CUTS)
The numeric keys of the keyboard are used to enter digit numbers. The left and right arrows
select a digit to edit, skipping over non-editable columns. Press E
NTER
at the edit prompt to
complete selection of the destination location.
Note that the Drive number must be left at '1' and the Directory number at '0' when sending to
other Instant Replay machines. Transmissions cannot be directed to the External drive.
However, when sending to machines such as the DigiCart/II which support multiple Drives
and Directories, the Drive and Directory numbers may be changed.
•
Press the S
CROLL
U
P
A
RROW
. The display will show:
BEGIN TRANSFER