360 Systems Instant Replay DR-552 - Manual (Page 39)

page 34 Instant Replay Owner’s Manual
This in turn causes the digital audio transmitter to resynchronize. This is unavoidable; turn
off Echo or File Receive when using the Digital outputs.
Receiver Input
Selects either the RCA or the XLR-3 digital input connector for receiving files.
Receiver Name
This field specifies an optional name for addressing the receiver during file transfer. A blank
name causes a machine to receive all file transfers regardless of the Receiver Name specified
by the transmission (provided the destination Drive and Directory are correct).
Leading and trailing blanks in names are not allowed and are removed whenever a name is
saved.
When sending to a specific location instead of sending to a Mail Box, the destination Drive
defaults to '1', the destination Directory defaults to '0' and the destination Index defaults to the
Index of the currently selected Cut in the source machine. Applicable portions of the
destination disk location may be edited by the user.
Transfers To Accept
This menu determines whether transfers can be made to locations outside of the Mail Box are
accepted. The MAIL BOX ONLY choice causes the receiver to accept transfers with a
destination location of MAIL BOX and to reject transfers to specific locations. The ALL
choice causes the receiver to accept MAIL BOX transfers as well as transfers to specific
locations.
Backup Drive and Backup Bank Procedure
Backup Drive and Backup Bank operate in a similar manner. Backup Bank transmits only the
Cuts assigned in the currently selected Bank, the Hot-Key assignments and the Playlist. Select
the Bank to be backed up before beginning the operation. The Bank will always be Restored to
the same Bank number that it came from.
•
From the FILE TRANSFER menu select BACKUP DRIVE and press E NTER .
•
The M ENU button begins to flash and the display shows:
START BACKUP DEVICE
PRESS ENTER/CANCEL
•
Place the DAT machine in record (via its AES/EBU digital input) and press E NTER . (Or
C ANCEL to prevent starting the backup). The display shows:
PREPARING TO BACKUP
STOP/CANCEL TO QUIT