Using playlists – 360 Systems Instant Replay DR-552 User Manual
Page 16

Instant Replay Owner’s Manual
page 11
USING PLAYLISTS
Creating a New Playlist
To create a new Playlist:
•
Enter Playlist mode by pressing the P
LAYLIST
button. It will light, and the display will
show:
LIST IS EMPTY
SELECT HOT KEY
•
Press the H
OT
-K
EY
you want to use as the first entry. The display will indicate the
Step Number, ID Number, Cut Name, running time and Bank-HotKey assignment.
The H
OT
-K
EY
flashes to indicate it is next to play.
1 015 CUT NAME
00:01:30 1-32
•
Continue pressing H
OT
-K
EYS
to add steps to the Playlist in the order they are to play.
•
Press P
LAY
to hear the Playlist. Depending on the programmed Playlist Type, you
will hear the first Cut or all the Cuts in order.
•
If it is a Manual Step playlist, press Play to hear the next Cut, before or after the first
Cut ends.
•
Press Stop to end playback of the current Cut and automatically select the next Cut
in the list to be played. If it is the last Cut in the list, Playlist mode will end
automatically.
•
Press P
LAYLIST
to exit. The Playlist is saved to disk upon exiting Playlist mode.
Note that whenever P
LAYLIST
is enabled, the Hot-Keys are used only for adding events to the
Playlist and do not play audio. Only Cuts assigned to the currently selected Bank can be included
in the Playlist.
Setting the Type of Playlist
After you have created a Playlist, you can change it from MANUAL STEP to FOLLOW-ON or
vice-versa. Once Playlist Type has been set for a particular Bank's Playlist, it will not change
unless reprogrammed, even if the Playlist is cleared. The original setting is MANUAL STEP.
•
S
CROLL
D
OWN
until you see START OF PLAYLIST. (If it is a long list, the fastest way
to do this is to turn P
LAYLIST
off and back on again, then press the S
CROLL
D
OWN
A
RROW
key.) The display shows the Playlist type.
START OF PLAYLIST
MANUAL STEP
•
Press E
NTER
to edit the type; the bottom line will start flashing.
•
Use the S
CROLL
A
RROWS
to choose between MANUAL STEP and FOLLOW-ON.
•
Press E
NTER
to accept the new Playlist Type or C
ANCEL
to quit.
Note that if PLAYLIST PROTECTION is ON, the Playlist Type cannot be changed.(See page
22).