Cub Cadet 2000 Series - Manual (Page 98)

2000 Series Tractors
92
NOTE: Lift the EPS out of the tractor.
NOTE: The EPS output shaft will pass through a
spacer, washer and the steering housing.
See Figure 6B.25.
NOTE: Install the EPS by following the previous
steps in reverse order.
NOTE: The washer that goes in between the pinion
gear and the steering housing, must be held
in place under the tractor while inserting the
EPS into the steering housing.
22. Test drive the tractor in a safe area before returning
it to service.
Figure 6B.25
Spacer
Washer