Freerider FR510DXs2b(Kensington-S) - Manual (Page 27)

27
4. Always handle batteries carefully, they are heavy, it may
require two people for lifting. Wear protective gloves and
glasses when handling.
5. Dispose of worn out batteries carefully, contact your local
waste disposal authority.
Remove salt
contact as this is very corrosive to bright metal parts.
SEAT UPHOLSTERY
BODYWORK
Caution:
Your Scooter like any other electro-mechanical machine will
benefit from regular servicing by your
dealer.
You too, can help keep your in tip-top condition by
following a simple guide to home maintenance.
A damp cloth and a little soapy water will keep your seat,
backrest and arms looking smart. Do not use abrasive
cleaners as this will damage the coating. Upholstery can be
damaged by chemical cleaners. The coating material can also
degrade over a period of time due to contamination by
natural oils in the hair and skin or from medicated power
products..
Ultra-violet light can also reduce the life of the upholstery
coating material. This is a normal ageing process and cannot
be guaranteed (see exclusions in the Guarantee Terms).
The painted bodywork on your Scooter can
be lightly washed with clean soapy water. Do not use
abrasive cleaners or strong detergents. This could fade the
colour, an auto tyre shampoo works well.
Freerider
Freerider
Note: Only competent people should carry out service work.
Freerider
Do not hose down your with a powerful Scooter
cs and cause
permanent damage.
On the painted finish, be cautious not to wash with a dirty
cloth as this could scratch the paint finish. Auto polish can
be used to keep the paintwork and bright chrome parts in
pristine condition.
The metal framework of your Scooter should be
cleaned once a year and any paintwork damaged should be
cleaner. Water could be forced into the electroni
Freerider
Freerider
Note: Only competent people should carry out service work.
Freerider
SEAT UPHOLSTERY
BODYWORK
Caution:
CARE & MAINTENANCE
treated to prevent further attack from the elements. Wash
regularly if contact is made with road or sea salt, this is very
corrosive.
store your Scooter in damp conditions. This
may affect the electronics if left for very long periods of
time. Moisture, if left unattended can cause deterioration on
metal work, protect with proprietary cleaners.
Servicing of the drive electronics and charger should only be
carried out by your local
service dealer. These
units are sealed and should not be opened.
Do not
Freerider
BROKEN
SEALS WILL INVALIDATE YOUR GUARANTEE.
The motor on your Scooter is fitted with
long-life brushes. The brushes should be inspected for
wear every 12 months or more frequently if you use you
Scooter daily for long periods. The brushes should be
changed when they have worn down to approximately
8mm in length.
This unit is factory filled and will not normally need additional
lubrication.
Note: Your Scooter transmission is filled
with a special lubricant. attempt to force grease into
Freerider
Freerider
Do not
ELECTRONICS
MOTOR
DRIVE TRANSMISSION LUBRICATION
Do not operate your Scooter in exceptional weather
conditions i.e. very heavy rain or wind. Cover your machine
up, if it is to be left unattended and outside for a long period
of time.
Freerider
Do not drive through deep water with your Scooter.
This could damage the electronic speed controller. Sea and
road salts are very corrosive and should be neutralized quickly.
Do not
Freerider
Freerider
ELECTRONICS
MOTOR
DRIVE TRANSMISSION LUBRICATION
Freerider
Freerider
Do not