FRITSCH ANALYSETTE 18 - Manual (Page 4)

Table of contents
1 Basic structure............................................................................... 6
2 Safety information and use........................................................... 8
2.1 Requirements for the user..................................................... 8
2.2 Scope of application............................................................... 8
2.2.1 Operating principle............................................................. 9
2.3 Obligations of the operator................................................... 9
2.4 Information on hazards and symbols used in this manual.... 9
2.5 Device safety information.................................................... 12
3 Technical data.............................................................................. 14
3.1 Dimensions.......................................................................... 14
3.2 Weight.................................................................................. 14
3.3 Operating noise.................................................................... 14
3.4 Voltage................................................................................. 14
3.5 Frequency............................................................................ 14
3.6 Power rating......................................................................... 14
3.7 Control................................................................................. 14
4 Installation................................................................................... 15
4.1 Transport............................................................................. 15
4.2 Unpacking............................................................................ 15
4.2.1 Scope of delivery............................................................... 16
4.3 Setting up............................................................................. 17
4.4 Mounting the guide rods..................................................... 18
4.5 Ambient conditions.............................................................. 19
4.6 Electrical connection............................................................ 19
5 Using the device........................................................................... 21
5.1 Clamping the sieve stack...................................................... 21
5.1.1 TwinNut clamping system................................................. 21
5.1.2 Clamping........................................................................... 22
5.1.3 Preparing for wet sieving.................................................. 22
5.2 Sieve analysis in accordance with ISO 2591-1...................... 22
5.3 The maximum particle size permitted for test sieves.......... 23
5.4 Recommended bulk volume for test sieves with diameters
of 300 and 400 mm.............................................................. 23
5.5 Start-up and operation........................................................ 26
5.5.1 Switching on...................................................................... 26
5.5.2 Time.................................................................................. 26
5.5.3 Interval.............................................................................. 27
5.5.4 Amplitude......................................................................... 27
5.5.5 Start / Stop........................................................................ 27
5.5.6 Continue............................................................................ 27
5.5.7 Store.................................................................................. 27
Table of contents
- 4 -