Industrial Data Systems IDS 160 - Manual (Page 13)

3. CONFIGURATION OF THE IDS 160
Remove the access panel located on the back of the printer. The 8
position 'dip' switch is used to configure the serial communications
port. The thumbwheel switch and the push-button switches are used to
configure everything else.
The ENTER light provides feedback for the entry process. If there is
paper in the printer, the results of the data entry will be printed
after it is entered.
All data entry functions begin with the ENTER light OFF.
REMEMBER: The printer's personality is determined by the position of
the thumbwheel switch (ie. Dumb printer = mode 0 = thumbwheel switch at
position 0). Return the thumbwheel switch to the correct mode position
after configuration.
Topics Covered In Section 3:
3.1 CONFIGURE SERIAL COMMUNICATIONS PORT.
3.2 CONFIGURE PRINT FEATURES.
3.3 CONFIGURE BATTERY-BACKUP OPTIONS
3.4 CONFIGURATION OF WEIGHING APPLICATION OPTIONS.
3.5 INITIALIZE PRINTER TO FACTORY SETTINGS.