Industrial Data Systems IDS 160 - Manual (Page 8)

2.2 PRINT FEATURES.
The Print Features are used to customize the print format of the IDS 160
and to match the requirements of the 'host' device.
1. AUTOMATIC LINE-FEED AFTER CARRIAGE RETURN (Default = ON)
The printer inserts a line feed command whenever it receives a carriage
return command. Turn this feature on if your 'host' device does not
send a line feed after a carriage return.
2. AUTOMATIC FORM FEED (Default = ON)
Used by the Special Application modes. A bottom margin command is
issued after each print if auto form feed is on.
3. AUTOMATIC PRINT WRAP (Default = ON)
If more than 26 characters (13 char Enhanced) are printed a line feed is
performed, the overflow data is automatically printed on the next line.
If automatic print wrap is turned off, the overflow data is lost.
4. BOTTOM MARGIN. (Default = 0)
The bottom margin is used to advance the paper from 2 to 18 line feeds
after printing.
5. PRINT SIZES. (Normal, Enhanced, Mixed). (Default = Norm)
The Normal is 12 char/in (typewriter size). The Enhanced print is 6
char/in (double width). The Mixed size prints text in normal size and
numbers in enhanced size.
6. STATION NUMBER (Default = OFF)
The station number is used print a station ID on each ticket. Station
numbers range from 1 to 9.
7. HEADER LABEL. (Default = OFF)
The header label is used to print the company name or other information
on each ticket. The header label is up to 30 characters long.