KEYENCE EX-V Series - Manual (Page 73)

Chapter 4 Use of Data Processing Functions
4
63
When "[-1" or "[-2" is selected
5. Press the key to specify each function.
[- ■■ 0: Trigger level setting
[- ■■ 1: Trigger hysteresis setting
[- ■■ 2: Sampling delay setting
[- ■■ 3: Sampling period setting
6. Press the key to specify functions "10" to "13".
7. Press the key to specify each function.
• Specify the trigger level and trigger hysteresis based on the displayed value.
• Specify the sampling delay and sampling period as time length (ms).
8. Press the or key to specify the desired value.
• The value of the flashing digit can be changed. Pressing the key changes
the flashing digit to the right.
• Pressing the key changes the value.
• All digits flash when the fifth digit and sign can be changed.
Reference: Pressing the [ZERO] key here resets the display to "0000".
9. Press the key.
The sensor saves the setting and returns to the measurement state.
For trigger level/trigger hysteresis setting
No setting
(1st to 4th digits) (5th digit)
For sampling delay/sampling period setting
All digits move to the left.
When the key is
pressed while the 1st
digit is flashing,