KEYENCE IV Series - Manual (Page 3)

3
IV Series (Sensor) - IM_E
Optional parts for sensor
z „ Dome attachment
y IV-D10
Dome attachment x 1
Mounting screw x 2
Hexagon wrench
(L-shaped) x 1
Instruction Manual x 1
z „ Polarized visible light filter attachment
y OP-87436
Polarized visible light filter
attachment x 1
Mounting screw x 2
Instruction Manual x 1
z „ Infrared polarization filter attachment
y OP-87437
Infrared polarization filter
attachment x 1
Mounting screw x 2
Instruction Manual x 1
z „ Power I/O cable (M12 12pin - strand wire)
yOP-87440 (2m) yOP-87441 (5m) yOP-87442 (10m)
Power I/O cable (M12 12pin - strand wire) x 1
z „ Mounting adapter
y OP-87460
Mounting adapter x 1
Screw for mounting
adapter x 1
Same as the accessories for sensor.
Optional parts in case of loss/damage.
z „ Front cover (for replacement)
y OP-87461
Front cover (for
replacement) x 1
Mounting screw x 2
O-shaped ring
(Small x 2, Large x 1)
Hexagon wrench
(L-shaped) x 1
Instruction
Manual x 1
Optional parts for replacement.
z „ Bracket
y OP-87685×1
Bracket A x 1
Bracket B x 1
Mounting screw for
bracket + Nut x 1
Screw for mounting
adapter x 4
Name and function of each part
z „ Name and function of each part of sensor
1
2
3
4
5
6
7
8
1 Sensor mounting adapter
Use this for mounting and fixing the sensor.
“Mounting” (Page 4)
2 Connector for power I/O cable
Connector for connecting a power I/O cable.
Use this for supplying power to the sensor and for
connecting with external devices.
“Cables” (Page 6)
3 Focusing position adjustment screw
(manual focus type only)
Adjusts the focus of displayed images.
4 Connector for monitor cable/Ethernet cable
Connector for connecting a monitor cable or Ethernet
cable. Use this for connecting the monitor, PC, or Ethernet
switch.
“Cables” (Page 6)
When the cable is not connected, attach
the waterproof cap for Ethernet connector
to maintain enclosure rating.
Tightening torque : 0.45 to 0.55 N·m
5 Indicator light
Indicates the operating status of the sensor.
“Operation of the indicator light” (Page 4)
6 Built-in light
LED light that illuminates the object.
7 Camera
Images the object.
8 Front cover
Protects the camera and built-in lights.
The front cover is protected by the protection sheet (blue)
in the default factory setting.
Remove the sheet when the sensor is to be used.
Front cover for replacement is provided for maintenance.