KEYENCE IV Series - Manual (Page 9)

9
IV Series (Sensor) - IM_E
Specifications
Model IV-500C IV-500CA IV-500M IV-500MA IV-150M IV-150MA IV-2000M IV-2000MA
Installed distance Standard distance (50 to 500 mm) Short range (50 to 150 mm) Long range (300 to 2000 mm)
View
Installed distance 50 mm : 25 (H) x 18 (V) mm
to
Installed distance 500 mm : 210 (H) x 157 (V) mm
Installed distance 50 mm :
12 (H) x 9 (V) mm
to
Installed distance 150 mm :
36 (H) x 27 (V) mm
Installed distance 300 mm :
45 (H) x 33 (V) mm
to
Installed distance 2000 mm :
300 (H) x 225 (V) mm
Image sensor 1/3 inch color CMOS 1/3 inch monochrome CMOS
Pixel 752 (H) x 480 (V)
Focus adjustment Manual Auto *1 Manual Auto *1 Manual Auto *1 Manual Auto *1
Exposure time 1/10 to 1/50,000 1/10 to 1/25,000 1/20 to 1/25,000 1/10 to 1/25,000
Lights
Amplifier type White LED Red LED Infrared LED
Lighting method Pulse lighting/DC lighting is switchable
Tools
Type Outline search, Color area *7 , Area *8 , Position adjustment
Number *2 Detection tools : 16 tools, Position adjustment tool : 1 tool
Switch settings (programs) 32 programs
Image
history *3
Numbers 100 images *4 300 images *5
Condition NG only/All is selectable
Analysis information *6
OFF/Statistics/Histograms is switchable
Statistics : Processing time (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs,
trigger numbers, trigger errors, judge results list by tools
Histograms : Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs
Other functions
HDR, HighGain, Color filters *7 , Digital zoom *8 , Brightness correction, Tilt correction, White balance *7 ,
Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator *9
Indicators PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input
No-voltage input/voltage input is switchable
For no-voltage input : ON voltage 2V or lower, OFF current 0.1mA or lower, ON current 2mA (short circuit)
For voltage input : Maximum input rating 26.4V, ON voltage 15V or higher, OFF current 0.2mA or
lower, ON current 2mA (for 24V)
Inputs 6 inputs (IN1 to IN6)
Function
IN1 : External trigger, IN2 to IN6 : Enable by assigning the optional functions
Assignable functions : Program switching, Clear error, External master image registration
Output
Open collector output NPN/PNP is switchable, N.O./N.C. is switchable
For open collector NPN output : Maximum rating 26.4V 50mA, remaining voltage 1.5V or lower
For open collector PNP output : Maximum rating 26.4V 50mA, remaining voltage 2V or lower
Outputs 4 outputs (OUT1 to OUT4)
Function
Enable by assigning the optional functions
Assignable functions : Total judge result, RUN, BUSY, Error, Position adjustment result, Judge
result of each tool, Result of the logical operation of each tool
Ethernet *10
Standard 100BASE-TX/10BASE-T
Connector M12 4pin connector
Network function FTP client, EtherNet/IP, PROFINET
Rating
Power voltage DC 24V ± 10% (including ripple)
Consumption
current
0.6 A or less
Environmental
resistance
Ambient
temperature 0 to +50°C (No freezing)
Relative humidity 35 to 85%RH (No condensation)
Vibration 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each for X, Y, and Z axes
Shock resistance 500m/s 2 6 different directions in 3 times
Enclosure rating *11 IP67
Material Main unit case : Aluminum die-casting, Packing : NBR, Front Cover : Acrylic, Mounting adapter : POM
Weight Approx. 270 g
*1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. The focusing
position can be registered by programs.
*2 Tools can be installed by programs.
*3 Saves to the memory in the sensor.
The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the
PC by the software for IV (IV-H1).
*4 When using the FTP client function ; 70 pictures
*5 When using the FTP client function ; 210 pictures
*6 This can be displayed on the intelligent monitor (IV-M30) or by the software for IV (IV-H1).
*7 Color type only.
*8 Monochrome type only.
*9 This function can be used with the software for IV (IV-H1).
*10 This is for connection with the intelligent monitor (IV-M30) or the software for IV (IV-H1).
*11 Except when polarized filter attachment (OP-87436/OP-87437) is mounted.