KEYENCE BL-N70 Series - Manual (Page 41)

4-13
4
P
rog
ramming
B
L-N70
Se
tt
ings
4-4 Trigger Mode Settings
z Trigger switch mode
‹ Setting the laser off time
After reading the "Trigger switch mode" barcode above, use the following method to
set the laser off time setting.
• To set the time, read three barcodes for the decimal program code ( page 4-24).
The time can be set between 500 and 15,000 ms in 100 ms intervals.
Example: To set the trigger off time to 3 seconds (3000 ms):
1. Read the "Laser off time setting" barcode.
2. Read the decimal program code "0." The buzzer sounds once.
3. Read the decimal program code "3." The buzzer sounds two times.
4. Read the decimal program code "0." The buzzer sounds three times.
Laser off time setting
z Continuous emission mode
z Continuous reading mode
Read the decimal program codes
( page 4-24) three times