Futaba RS302CD - Manual (Page 4)

4
To use this product safely, please pay your full attention to the followings. Be sure to
read this instruction manual prior to using this product.
Warning Symbols
The warning symbols used in this text are defined as follows:
Indication Meaning
Danger Indicates a hazard that will cause severe personal injury, death, or
substantial property damage if the warning is ignored.
Warning Indicates a hazard that can cause severe personal injury, death, or
substantial property damage if the warning is ignored.
Caution Indicates a hazard that will or can cause minor personal injury, or
property damage if the warning is ignored.
Symbols: ; Prohibited ; Mandatory
Cautions for Use
Caution
Do not disassemble or alter the servo.
Otherwise, it may cause breakage in the gear box, fire on the servo or explosion of
the battery.
Do not use any battery as a power supply other than the specified battery.
The product is designed to be operated by Futaba’s 9.6V Ni-MH battery only. Do not
use any other batteries.
Do not touch the servo case during or some time after operating the servo.
Otherwise, you may get burned on the finger as the motor or electronic circuit in the
servo gets very hot.
Do not let the servo get covered with sandy dust or water.
Otherwise, the servo may stop moving or have a short circuit. The servo is not
designed to be waterproof or dust-proof.
Do not use this product for any application other than indoor hobby-robots.
Futaba is cleared of all responsibility to the results caused by the usage of this
product for any application other than indoor hobby-robots.
1.FOR SAFETY