Futaba RS302CD - Manual (Page 9)

9
Cautions when Connecting
Please refer to the figure below for connecting RS301CR/RS302CD and RPU-10.
Fig. 3.3 Operating with RPU-100
Allowable current for relay connectors is 2A and for servo harness is 3A each for continues use.
Set your PC’s communication parameters as follows;
Baud rate
： 115.2 bps
（ adjustable between 9.6kbps and 460kbps, Refer to Table 4.6 Baud rate in p.19）
Data bit length ：8 bits
Parity
： none
Stop bit ： 1 bit
Flow control ： none
RPU-10
PC
Please prepare it by your self
Relay box
RS301CR/RS302CD
RS232C
PR-4S780P