GTCO DrawingBoard VI - Users Guide - Manual (Page 5)

DrawingBoard VI 5
Parts Checklist
 DrawingBoard VI digitizer/tablet
 Transducer (corded or cordless pen,
4-button or 16-button cursor)
 USB cable
 CD-ROM with Windows Drivers and
user’s manual
 Universal mounting brackets
 Registration card
Optional Equipment
 RS-232 serial kit (power supply and
cable)
 Accessory tray*
 Clear overlay*
 Manual lift/manual tilt*
 Magnifier lens for high-accuracy
cursor*
*For Large Format Digitizer Only
What You Will Need to Use DrawingBoard VI
PC Requirements
DrawingBoard VI is equipped with both a USB and RS-232 serial interface, which requires
an optional RS-232 cable and power supply. It is compatible with a majority of industry-
standard PCs. The TabletWorks CD contains drivers provided by GTCO CalComp by Turning
Technologies and is the only software described in this manual. TabletWorks supports
reduced functionality Wintab and TabCon-compatible applications. If you are not sure
which drivers are required, please consult with your application vendor.
A USB connection requires the use of a TabletWorks driver, while a serial connection
requires the use of a TabletWorks driver and/or a custom application program. After
installing the TabletWorks software, DrawingBoard VI will work with all Windows-based
applications specifically designed for use with digitizers.
For a USB Installation
 Microsoft Windows 98 SE, ME, 2000, XP, Vista, 7 or 8
 One available USB port
 10 MB of free disk space
 Application software that accepts digitizer input via the Wintab API or TabCon API