GTCO DrawingBoard VI - Users Guide - Manual (Page 6)

DrawingBoard VI 6
For an Optional Serial Installation
 Microsoft Windows 98, ME, NT 4.0, 2000, XP, Vista, 7 or 8
 One available RS-232C serial communication port (Serial signal levels must conform
to EIA RS-232C specifications)
 10 MB of free disk space
 Application software that directly accepts digitizer input via the computer’s RS-232C
serial port, or via the Wintab API or TabCon API
Overview
The DrawingBoard VI digitizer (large format shown here) consists of:
Active Area
The drawing area – Active Area – is the portion of the tablet surface designated for
digitizing. Its boundaries are marked at each corner by a right-angle crop mark on large
format tablets. On small format tablets, the Active Area is delineated by the overlay – not
including the menu.