GTCO CR 1212 - Users Guide - Manual (Page 18)

CR 1212 18
Stream Mode
In Stream Mode, the graphics tablet issues reports continuously, whether a stylus/cursor
button is pressed or not. The Report Rate, described below, controls the number of
reports issued per second.
When moving the stylus/cursor out-of-prox, the tablet issues the last in-prox scanned
report three or four times before it stops transmitting.
Switch Stream Mode
In Switch Stream Mode, the graphics tablet issues report continuously while pressing a
stylus/cursor button. The Report Rate, described below, controls the number of reports
issued per second. When releasing the button, the tablet issues an additional report. This
report is the last scanned report, but its flag bit is 0 (zero).
If the stylus/cursor is out-of-prox when pressing a button, the last in-prox scanned report is
issued continuously.