GTCO CR 1212 - Users Guide - Manual (Page 38)

CR 1212 38
 Cursor is most accurate when held parallel with the tablet surface. To activate a
cursor button, press it.
 The tablet beeps each time the stylus/cursor button is pressed.
 Remember to release the pressure on the stylus/cursor button when you’re done
performing a function.
 When you turn off the computer, turn off the tablet.
 The unit is affected by conductive materials. Do not trace through metal or
metallized paper. Do not use metal objects, such as rulers, on the tablet. However,
with the cursor, you can trace through some conductive materials, such as X-rays or
drawings in pencil or conductive ink.