HONDA 2004 CR-V - Owner's Manual - Manual (Page 108)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the Auto Select feature
to find stations in the local area.
Press the A. SEL Button. ‘‘A.SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if Auto
Select cannot find a strong station
for every preset button.
If you do not like the stations Auto
Select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE, SEEK, or
SCAN functions to find stations, then
store them in the preset buttons as
described.
press the
A. SEL button. This restores the
presets you originally set.
Press the knob to get it
to pop out. Turn it to adjust the Bass
level. Pull it out slightly farther to
adjust the Fade, or front-to-back
strength. Push the knob back in
when you are done adjusting the
sound.
Use the TRE/BAS
modes or controls to adjust the tone
to your liking.
These two
modes adjusts the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
To turn off Auto Select,
On LX model in the U.S. and Canada
AUTO SELECT Adjusting the Sound
BAS/FAD:
Treble/Bass
Balance/Fader
Playing the Radio
Comf ort and Convenience Features 104
Main Menu Table of Contents