Instrument panel – HONDA 2004 CR-V - Owner's Manual User Manual
Page 60
The instrument panel has many
indicators that give you important
information about your vehicle.
See page
.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
It comes on when you turn the
ignition switch to ON (II). It is a
reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
This indicator has two functions:
If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
This indicator comes on when you
turn the ignition switch to ON (II). It
is a reminder you and your
passengers to protect yourselves by
fastening you seat belts. A beeper
also sounds if you have not fastened
your seat belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the indicator stays on
until you do. Both the indicator and
the beeper stay off if you fasten your
seat belt before turning on the
ignition.
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
2.
1.
Instruments and Controls
Instrument Panel
Malf unction Indicator
Lamp
Low Oil Pressure
Indicator
Charging System
Indicator
Parking Brake and
Brake System
Indicator
Seat Belt Reminder
Indicator
56
U.S.
Canada
Main Menu
Table of Contents