HONDA 2004 CR-V - Owner's Manual - Manual (Page 190)

Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tipped
screwdriver. Use a Phillips-head screwdriver to
remove the taillight assembly
mounting screw under each cover.
Pull the taillight assembly out of
the rear pillar.
Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal, or side
marker.
Remove the socket by turning it
one-quarter turn counterclockwise.
1. 2.
3.
4.
5.
Replacing Rear Bulbs
Lights
Maintenance 186
BULBS
SCREW
COVER
Main Menu Table of Contents