HONDA 2004 CR-V - Owner's Manual - Manual (Page 193)

Check the condition of the wiper
blades at least every six months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Examine the new wiper blades. If
they have no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade.
Front:
Raise the wiper arm off the
windshield.
Rear:
Raise the wiper arm off the hatch
glass and hold it.
1.
3. 2.
4.
Maintenance
Wiper Blades
189
LOCK TAB
BLADE
Main Menu Table of Contents