HONDA 2004 CR-V - Owner's Manual - Manual (Page 46)

Remove the head restraint (see
page
).
Make sure the removed head
restraints are secured in the cargo
area. Reinstall the head restraints
when the child seat is removed.
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Route the tether strap over the
seat-back, making sure the strap is
not twisted.
Attach the tether strap hook to the
tether anchorage point, then
tighten the strap as instructed by
the child seat maker.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
5.
4.
6.
7.
8.
79
Installing a Child Seat
Driver and Passenger Saf ety 42
TETHER ANCHORAGE POINT
TETHER STRAP HOOK Flexible type
Main Menu Table of Contents