Installing a child seat – HONDA 2004 CR-V - Owner's Manual User Manual

Page 45

Advertising
background image

Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the outer
rear seats. The lower anchors are
located between the seat-back and
seat bottom, and are to be used only
with a child seat designed for use
with LATCH.

Small marks are positioned to
indicate the locations of each anchor
point.

To install a LATCH-compatible child
seat:

Move the seat belt buckle or
tongue away from the lower
anchors.

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and
anchors.

Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker’s instructions.

Some LATCH-compatible seats
have a rigid-type connection as
shown above.

1.

2.

3.

CONTINUED

Installing a Child Seat Using
LATCH

Installing a Child Seat

Driver and Passenger Saf ety

41

LOWER ANCHORS

Rigid type

MARKS

Main Menu

Table of Contents

Advertising