HONDA 2004 CR-V - Owner's Manual - Manual (Page 206)

Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
center of the jacking point tab is
resting in the jack notch. Pull off the center spacer. Using
the wheel wrench, loosen the
three wheel nuts and remove them.
Remove the spare tire from the
holder.
Loosen the five wheel nuts 1/2
turn with the wheel wrench.
Unzip the flap around the lower
edge of the cover.
Pull out the bottom of the cover,
then gradually pull it off.
9. 11.
10.
7.
8.
On EX-L model in Canada
Changing a Flat Tire
Taking Care of the Unexpected
Hard plastic spare tire cover
202
CENTER SPACER JACKING POINT
NUTS
Main Menu Table of Contents